Alat LAboratorium Teknik Sipil

CV. ARYA CHANDRA LABORATORY (CV. ACL) adalah salah satu perusahan sebagai Produsen & Supplier alat-alat Laboratorium Teknik Sipil untuk Jalan, Jembatan, Bangunan dan Beton.

* Lab. Material/ Testing quipment (Soil, Asphalt, Concrete).
* Training, Laboratry & Contractor.
* General Trading, Export & Import.
* Mining Laboratory Machinary.Produk-produk kami menggunakan Standar Nasional Indonesia (SNI) dan Internasional (ASTM, AASHTO, JIS), didukung dengan tenaga-tenaga ahli yang berpengalaman dan Suku cadang kami tersedia banyak dengan Harga Kompetitiv. Selama ini Pruduk-pruduk kami telah banyak digunakan dibeberapa Instansi Pemerintah, BUMN, Perguruan Tinggi Negeri dan Swasta, kontraktor dan Konsultant.

INFORMASI PRODUK

(S-110A) HAND BOR	(S-400) SAND CONE TEST SET	(A-104) SAMPLE SPLITTER	(A-825) SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET

(C-301) CONCRETE CYLINDER MOLD	(C-325.4) COMPRESSION MACHINE	(B-110 A) DISTILATION OF CUTBACK ASPHALT	(B-220 A) LOSS ON HEATING/ THIN-FILM TEST

Untuk Pemesanan Hubungi:

Office : Puri Cipageuran Indah 2 Blok C 17 No. 18-19 Cimahi 40511 Bandung
Telp. : (022) 6611229, 86600548 / Fax. : (022) 86600548. HP. 081320691794
e-mail : aryachandralab@yahoo.com / aclt_arya@gmail.com
Factory : Jl. Rajawali Sakti/ Sasak Cilimus No/ 189/77 Bandung

LABORATORY PENETRATION TEST SET (B-230A)

B-230A LABORATORY PENETRATION TEST SET
ASTM D-5 AASHTO T-49

For determining consistency of bituminous materials

B-231A	Penetrometer	electric control box, 220 V-AC variable timer, On-OFF and start switch for automatic plunger release cast alumunium frame 4 1/2" dial indicator 400 x 0.1 mm dial, knob control : manual + electric, weight of needle and plunger : 50 gr	1 set
B-232	Penetration Needle	Steel needle with brass shank, 1 mm dia	2 Pcs
B-233	Transfer Dish	Glass, 100 mm i.d approx	1 Pc
G-390	Thin Box	55 mmm i.d approx, lumunium sheet, seamless	2 Pcs

Also required, but not part of this set :

G-363	Mixing Bowl
G-600	Thermometer

Dimension (l x w x h)	: 50 x 50 x 70 cm
Gross weight	: 25 kg

Kembali

FLASH AND FIRE POINT BY CLEVELAND OC (B-200A)

B-200A FLASH AND FIRE POINT BY CLEVELAND OPEN CUP
ASTM D-92 AASHTO T-48

For determining falsh and fire point by cleveland open cup for petroleum product and other liquid, except fuel oil and material having an open flash poin below 79°C (173 F) as determined by the cleveland open cup tester

B-201	Flash Cup	Brass, insulation handle	1 Pc
B-202A	cleveland Electric	Electric, 220 V-AC heating speed control	1 Set
G-648	Thermometer	ASTM 11°C, 6 to 400°C	1 Pc

Also required, but not part of this set :

G-363	Mixing Bowl

Dimension (l x w x h)	: 100 x 50 x 50 cm
Gross weight	: 20 kg

Kembali

FLASH AND FIRE POINT BY CLEVELAND OC (B-200)

B-200A FLASH AND FIRE POINT BY CLEVELAND OPEN CUP
ASTM D-92 AASHTO T-48

For determining falsh and fire point by cleveland open cup for petroleum product and other liquid, except fuel oil and material having an open flash poin below 79 C (173 F) as determined by the cleveland open cup tester

B-201	Flash Cup	Brass, insulatio handle	1 Pc
B-202	cleveland Gas
	Consist of :
B-202.1	Burning Pipe	Brass pipe, insulation handle	1 Pc
B-202.2	Flash Cup Plate	Steel Plate	1 Pc
B-202.3	Support	adjustable height metal, thermometer holder	1 Pc
B-203	Y- Connector	Brass, Provided with gas hose	1 Set
G-230	Bunsen Burner	Heat Resources	1 Pc
G-648	Thermometer	ASTM 11°C, 6 to 400°C	1 Pc

Also required, but not part of this set :

G-222	Butane field heater
G-363	Mixing Bowl

Dimension (l x w x h)	: 150 x 30 x 30 cm
Gross weight	: 8 kg

Kembali

SPECIFIC GRAVITY & ABSORPTION OF COARSE (A-830)

A-830 SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET
ASTM C-127 AASHTO T-85

For Determining spcific gravity and water absorption of coarse aggregate

A-831	Dunagan Balance
	Consist of :
A-831.1	Mounting Table	Weided steel table, elevated container support	1 Pc
A-831.2	Water Container	Galvanized Container, 20 ltr Capacity	1 Pc
G-161	Balance	Digeital Balance, 220V,6100 gr x 0.1 gr capacity	1 Pc
A-822	Sample Basket	# 8 mesh, 200 mm dia 200 mm height	1 Pc

Also required, but not part of this set :

A-105	Smaple Splitter
G-174	Drying Oven
G-303	Square Pan
G-750	Quartering canvas
G-801	Scoop

Dimension	(Ixwxh)	: 85x50x120 cm
Gross weight	: 50 Kg

Kembali

SPECIPIC GRAVITY OF HYDRAULIC CEMENT TEST (C-110)

C-110 SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST
ASTM C-188 AASHTO T-133

For determining specific gravity of hidraulic cement

C-111	Le Chaeller lask	250 ml cap, the neck graduated 0-1 ml and 15-24 ml	1 Pc
C-112	Karosene	Deaired kerosene	1 Ltr
G-473	Funnel	Glass, narrow mouth	1 Pc
G-521	Wash Bottle	Plstic, 250 ml capacity	1 Pc
G-530	Pipette	Glass, 5 ml capacity	1 Pc
G-600	Thermometer	Glass, 0 - 50°C	1 PC
G-820	Spatula	150 mm blade lenght	1 Pc
G-922	Soft Brush	Round type	1 Pc

also required, but not part of this set :

G-150	Cent O-gram balance

Dimension (l x w x h)	: 20 x 20 x 30 cm
Gross weight	: 8 kg

Kembali

ABSORPTION OF FINE AGGREGATE TEST SET (A-810A)

A-810 ABSORPTION OF FINE AGGREGATE TEST SET
ASTM C-128 AASHTO T-84

For Determining the Water absorption of fine Aggregate at Saturated surface dry

A-811	Cone and Tamper
	Consist of :
A-811.1	Cone	Brass, 40 mm i.d at the top 990 mm i.d at the bottom, 75 mm height	1 Pc
A-811.2	Tamper	Machine steel, galvanized, 340 gr weight, 25 mm dia	1 Pc
G-363	Mixing Bowl	Stainless steel, 25 cm dia	1 Pc
G-396	Glass Plate	10 mm thick, 30 x 30 cm	1 Pc
G-412	Volumetric Flask	500 ml capacity
G-820	Spatula	Plastic Handle	1 Pc

Also required, but not part of this set :

A-100	Smaple Splitter
A-232A	Sieve No. 40
A-250	Pan & Cover
G-152	Triple Beam balance
G-174	Drying Oven
G-521	Wash bottle
G-530	Pipette
G-747	Rubber Gloves
G-750	Quartering canvas
G-800	Scoop
G-922	Soft brush

Dimension	(Ixwxh)	: 40x40x30 cm
Gross weight	: 7 Kg

Kembali

BULK DENSITY TEST SET (A-800)

A-800 BULK DENSITY TEST SET
ASTM C-29 AASHTO T-19

For Determining Bulk Density Of Fine, Coarse Or Mix Aggregate

C-410	Vibrating Table	Variable speed up to 3600 rpm, separate control box, 50 x 50 cm table	1 Set
A-801	Container	Machine steel, galvanized, 3 ltr, Capacity	1 Pc
A-802	Container	Machine steel, galvanized, 10 ltr, Capacity	1 Pc
A-803	Container	Machine steel, galvanized, 15 ltr, Capacity	1 Pc
A-804	Container	Machine steel, galvanized, 30 ltr, Capacity	1 Pc

Also required, but not part of this set :

G-159	Platform scale
G-801	Scoop
G-891	Straight edge
G-900	Rubber mallet
G-930	Tamping rod

Dimension	(Ixwxh)	: 60x60x100 cm
Gross weight	: 150 Kg

Kembali

LOS ANGLES ABRASSION MACHINE (A-700)

A-700 SAND EQUIVALENT TEST SET
ASTM D-2419 AASHTO T-176

For mmeasuring degradation of mineral aggregates from abrassion, impact and grinding

A-701	Los Angeles Abration Machine		1 Set
	Frame	weided steel frame, 8 and 12 cm (steel profile
	Drum	1/2' thick steel plate
		28"Inner diameter
		20' inner width
	Automatic counter	Digital Module system for easy maintanance
		Panel button : ON-OFF_RUN-STOP-JOG-RESET-500-1000
	Power	Electromotor,dual Voltage 110-220V, 750 watt, 1 Phase
		Heavy duty speed reducer
	Drum Speed	30 - 33 RPM
A-702	Steel Ball	Steel 1 7/8" diameter	12 Pcs
A-703	Catching Pan	Galvanized steel	1 Pcs

Also required, but not part of this set :

A-224A	Sieve No. 12
G-157	Heavy Duty solution balance
G-174	Drying oven
G-363	Mixing bowl
G-8017	Round Scoop

Dimension	(I x w x h)	: 120x100x150 cm
Gross weight	: 450 Kg

Kembali

INFORMASI PRODUK

SOIL EQUIOPMENT :

HAND BOR (S-110A)

STANDART PENETRATION TEST (S-130A)

SAMPLE EXTRUDER (S-140)

DYNAMIC CONE PENETROMETER (S-150A)

DUTCH CONE PENETROMETER (S-210)

PLATE BEARING TEST SET (S-250A)

FIELD CBR TEST SET (S-260)

PROVING RING PENETROMETER (S-270)

TVA PENETROMETER (S-280)

LIQUID LIMI TEST SET (S-310)

LIQUID LIMI DEVICE (S-311A)

PLASTIC LIMIT TEST SET (S-315)

SHRINKAGE LIMIT TEST SET (S-320)

HYDROMETER ANALYSIS TEST SET (S-330)

VACUM STAND (S-339A)

SPECIPIC GRAVITY (HEATING METHOD) (S-340)

SPECIPIC GRAVITY (VACUM METHOD) (S-340A)

SPECIPIC GRAVITY (VACUM METHOD) (S-340B)

COMPACTION TEST (S-350)

LABORATORY CBR TEST SET (S-360A)

LABORATORY CBR TEST SET (S-360B)

COMBINATION PERMEAMETER (S-370)

SAND CONE TEST SET (S-400)

SPEEDY MOISTURE TESTER (S-430)

MOISTURE CONTENT TEST SET (S-450)

UNCONFINED COMPRESSION MACHINE (S-500)

UNCONFINED COMPRESSION MACHINE (S-500A)

CONSOLIDATION TEST SET (S-515)

DIRECT SHEAR TEST SET (S-525)

AGGREGATE EQUIOPMENT :

SAMPLE SPLINTER (A-104)

GILSON SAMPLE SPLINTER (A-111)

PRECISSION SAMPLE SPLINTER (A-122)

BRASS ROUND SIEVE (A-208A/ A-250)

STAINLESS STEEL ROUND SIEVE

WOODEN SIEVE (A-400/ A-418)

WOODEN SIEVE (A-404/ A-492)

SIEVE SHAKER ELECTRIC (A-515)

SAND EQUIVALENT TEST SET (A-600)

LOS ANGLES ABRASSION MACHINE (A-700)

BULK DENSITY TEST SET (A-800)

ABSORPTION OF FINE AGGREGATE TEST SET (A-810A)

SPECIFIC GRAVITY & ABSORPTION OF COARSE (A-825)

SPECIFIC GRAVITY & ABSORPTION OF COARSE (A-830)

ORGANIC IMPURITIES TEST SET (A-910)

CEMENT EQUIPMENT :

AIR PERMEABILITY OF PORTLAND CEMENT (C-100)

SPECIPIC GRAVITY OF HYDRAULIC CEMENT TEST (C-110)

TIME OF SETTING OF HIDRAULIC CEMENT (C-120)

COMPRESSIVE STRENGTH OF HIDRAULIC C MORTAR (C-160)

COMPRESSIVE STRENGTH OF HIDRAULIC C MORTAR (C-160A)

CONCRETE CYLINDER MOLD (C-301)

CONCRETE CUBE MOLD (C-312)

CONCRETE BEAM MOLD (C-317A)

COMPRESSION MACHINE (C-321.4)

COMPRESSION MACHINE (C-325.4)

HIDRAULIC CONCRETE BEAM TESTING MACHINE (C-330)

SLUMP TEST SET (C-370)

CONCRETE TEST HAMMER, MATEST MODEL Cod: C380,

AIR CONTENT OF FRESH MIXED CONCRETE (C-400)

VERTICAL CYLINDER CAPPING SET (C-470)

MODULUS OF ELASTICITY (C-500)

CONCRETE TEST HAMMER (C550)

CALIBRATION ANVIL (C-555)

LOBORATORY CONCRETE MIXER (C-610)

ASPHALT EQUIPMENT :

SPECIPIC GRAVITY OF SEMI SOLID BITUMINOUS (B-100A)

DESTILATION OF CUTBACK ASPHALTS (B-110A)

WATER CONTENT IN PETROLEUM PRODUCT (B-120)

SAYBOLT VISOSIMETER (B-150A)

FLASH AND FIRE POINT BY CLEVELAND OC (B-200)

FLASH AND FIRE POINT BY CLEVELAND OC (B-200A)

SOFTING POINT TEST SET (B-210A)

LOSS ON HEATING / THIN FILM TEST (B-220A)

LABORATORY PENETRATION TEST SET (B-230)

LABORATORY PENETRATION TEST SET (B-230A)

DUCTILITY OF BITUMINOUS (B-250)

CENTRIFUGE EXTRACTOR TEST SET (B-300)

CENTRIFUGE EXTRACTOR TEST SET (B-300A)

REFLUX EXTRACTOR TEST SET (B-310)

MARSHALL TEST SET (B-320)

CORE DRILLING TES SET (B-400A)

BENELEMAN BEAM (B-450)

MOT STRAIGHT EDGE (B-470)

DIRECT SHEAR TEST SET (S-525)

S-525 DIRECT SHEAR TEST SET
ASTM D-3080 AASHTO T-236

For determining Shearing resisance of soil sample

S-526	Loading Machine
	Consist of :
S-526.1	Frame	Weided steel frame hand operated	1 Pc
S-526.2	Loading Hanger	Machine steel, galvanized, suplied without load	1 Pc
S-527	shear box	Cast alumunium box, 63.5 mm sample dia, Porous Stone, loading cap	1 Set
S-523	Loads	Slotted, Machine steel
	Consist of :
S-523.1	Load	3167 gr weight	2 Pcs
S-523.1	Load	6334 gr weight	1 Pc
S-524	Sample Tube	Machine steel, 63.5 mm dia galvanized with extruder	1 set
G-101.1	Proving ring	100 kg capacity	1 pc
G-135	Dial Indicator	Range 10 mm x 0.01 mm	2 Pc
G-135	Dial Indicator	Range 20 mm x 0.01 mm	2 Pc
G-840	Wire Saw	10 cm lenght approx	1 Pc

also required, but not part of this set :

S-450	Moisture content test set
G-521	Wash Bottle
G-700	Stop watch
G-710	Vernier caliper
G-820	Spatula

Dimension (l x w x h)	: 130 x 50 x 130 cm
Gross weight	: kg

Kembali

CONSOLIDATION TEST SET (S-515)

S-515 CONSOLIDATION TEST SET
ASTM D-2435 AASHTO T-216

For determining The Rate And Magnitude Of Consolidation Of Soil When It Is Restrained Laterally, Loaded And Drained Axially

S-516	Consolidation Frame
	Consist of :
S-516.1	Frame	Cast Alumunium, two test unit	1 Set
S-516.2	Loading Set	Three Alternative lever arm 1 : 9, 1 : 10, 1 : 11	2 Set
S-517	Consolidometer	Brass, 505.5 mm Sample dia, porous stone, loading cap	2 Set
S-518	Loads	Slotted, Machine steel	2 Set
	Consist of :
S-518.1	Load	500 gr	4 Pcs
S-518.2	Load	1000 gr	2 Pcs
S-518.3	Load	2000 gr	2 Pcs
S-518.4	Load	4000 gr	2 Pcs
S-518.5	Load	8000 gr	2 Pcs
S-503.2	Sample Tubes	Machine steel, 50.5 mm dia,galvanied, with extruder	1 set
G-135	Dial Indicator	Range 10 mm x 0.01 mm	2 Pc
G-840	Wire Saw	10 cm lenght approx	1 Pc

also required, but not part of this set :

S-450	Moisture content test set
G-521	Wash Bottle
G-700	Stop watch
G-710	Vernier caliper
G-820	Spatula

Dimension (l x w x h)	: 80 x 70 x 100 cm
Gross weight)	: 130 kg

Kembali

UNCONFINED COMPRESSION MACHINE (S-500A)

S-500A UNCONFINED COMPRESSION MACHINE
ASTM D-2166 AASHTO T-208

For determining stress strain realationship of cohesive soil without confining pressure

S-501A	Unconfined Compression Machine	Electric, 220 V-AC, 200 W, variable speed, adjustable height	1 set
S-502	Sample Tubes
	Consist of :
S-502.1	Sample Tubes	35.0 mm dia x 70 mm height	1 Pc
S-502.2	Sample Tubes	47.5 mm dia x 95 mm height	1 Pc
S-502.3	Sample Tubes	70.0 mm dia x 140 mm height	1 Pc
S-503	Split Sample Tubes
	Consist of :
S-503.1	Split Sample Tubes	35.0 mm dia x 70 mm height	1 Pc
S-503.2	Split Sample Tubes	47.0 mm dia x 95 mm height	1 Pc
S-503.3	Split Sample Tubes	70.0 mm dia x 140 mm height	1 Pc
S-504	Extruder
	Consist of :
S-504.1	Extruder	34.5 mm dia x 71 mm height	1 Pc
S-504.2	Extruder	47.0 mm dia x 96 mm height	1 Pc
S-504.3	Extruder	69.5 mm dia x 141 mm height	1 Pc
S-505	Trimmer	Steel frame, 3 tubes size	1 Set
G-101.1	Proving Ring	100 kg capacity	1 Set
G-137	Dial Indicator	Range 30 mm x 0.01 mm	1 Pc
G-390	Thin box	Alumunium, 60 gr capacity	12 Pcs
G-840	Wire Saw	10 cm lenght approx	1 Pc

also required, but not part of this set :

S-450	Moisture content test set
G-700	Stop watch

Dimension (l x w x h)	: 80 x 70 x 100 cm

Kembali

UNCONFINED COMPRESSION MACHINE (S-500)

S-500 UNCONFINED COMPRESSION MACHINE
ASTM D-2166 AASHTO T-208

For determining stress strain realationship of cohesive soil without confining pressure

S-501	Unconfined Compression Machine	Cast Alumunium, gear box, adjustable height of top platen, hand operated 200 kg capacity	1 set
S-502	Sample Tubes
	Consist of :
S-502.1	Sample Tubes	35.0 mm dia x 70 mm height	1 Pc
S-502.2	Sample Tubes	47.5 mm dia x 95 mm height	1 Pc
S-502.3	Sample Tubes	70.0 mm dia x 140 mm height	1 Pc
S-503	Split Sample Tubes
	Consist of :
S-503.1	Split Sample Tubes	35.0 mm dia x 70 mm height	1 Pc
S-503.2	Split Sample Tubes	47.0 mm dia x 95 mm height	1 Pc
S-503.3	Split Sample Tubes	70.0 mm dia x 140 mm height	1 Pc
S-504	Extruder
	Consist of :
S-504.1	Extruder	34.5 mm dia x 71 mm height	1 Pc
S-504.2	Extruder	47.0 mm dia x 96 mm height	1 Pc
S-504.3	Extruder	69.5 mm dia x 141 mm height	1 Pc
S-505	Trimmer	Steel frame, 3 tubes size	1 Set
G-101.1	Proving Ring	100 kg capacity	1 Set
G-137	Dial Indicator	Range 30 mm x 0.01 mm	1 Pc
G-390	Thin box	Alumunium, 60 gr capacity	12 Pcs
G-840	Wire Saw	10 cm lenght approx	1 Pc

also required, but not part of this set :

S-450	Moisture content test set
G-700	Stop watch

Dimension (l x w x h)	: 80 x 80 x 110 cm
Gross Weight	: 100 kg

Kembali

MOISTURE CONTENT TEST SET (S-450)

S-450 MOISTURE CONTENT TEST SET

For determining moisture of soil sample

G-150	Cent O-Gram Balance	311 gr cap, 0.01 gr sens	1 Pc
G-174	Drying Oven	53 ltr capacity, internal dimension (lxwxh) 400 x 400 x 330 mm 220 V, 1400 W	1 Pc
G-390	Thin Box	Alumunium, 60 Gr capacity	12 Pcs
G-451	Dessicator	Transparent glass, 24 cm dia approx	1 Pc

also required, but not part of this set :

G-455	Sillica gel

Dimension (l x w x h)	: 80 x 80 x 110 cm
Gross Weight	: 100 kg

Kembali

SAND CONE TEST SET (S-400)

S-400 SAND CONE TEST SET
ASTM D-1556 AASHTO T-191

For determining the density of compacted soil in place

S-401	Sand Cone bottle	Plastic, 4 ltr cap. approx	1 Pc
S-402	Sand Cone funnel	Seamless metal, turning stopper, 6 1/2" dia bottom, 1/2" neck dia.	1 Pc
S-403	Base Plate	Cast Alumunium, 12" x 12"	1 Pc
S-404	Graduated Sand	Uncemented sand, passing #10, retained #60.25 kg capacity	1 Zak
G-380	Sample Can	Round can, tinned metal	6 Pcs
G-801	Round Scoop	Cast Alumunium	1 Pc
G-861	Spoon	Stainless steel	1 Pc
G-871	Trowel	Pointed type	1 Pc
G-880	Chisel	Hardened type	1 pc
G-900	Rubber Mallet	Wooden handle	1 pc

Also required, but not part of this set :

S-450	MOisture content test set
G-157	Heavy duty solution balance
G-396	Glass plate

Dimension	(l x w x h)	: 70x50x50 cm
Gross weight	: 50 Kg

Kembali

COMBINATION PERMEAMETER (S-370)

S-370 COMBINATION PERMEAMETER
ASTM D-2434 AASHTO T-215

For determining Coefficient Of Permeabillity of soil sample ratio of soil

S-371	Sampla Chamber	Transparent fibre glass, 2 1/2"i.d 8" height, compessiive spring cast alumunium body	1 Set
S-372	Funnel	Plastic, Wide mouth, with over flow	1 Pc
S-373	Frame	Alumunium	1 Pc
S-374	Porous Stone	2.47" diameter. 1/2" thick	2 Pcs
G-376	Burettle	Glass, 100 ml capacity without scale	1 Pc
G-420	Breaker Glass	100 ml capacity	1 Pc
G-700	Stop Watch	60 sec. sweep x 15 min	1 Pc

also required, but not part of this set :

G-600	Thermometer
G-710	Vernier Caliper

Dimension (l x w x h)	: 110 x 40 x 30 cm
Gross Weight	: 10 kg

Kembali

LABORATORY CBR TEST SET (S-360A)

S-360A LABORATORY CBR TEST SET
ASTM D-1883 AASHTO T-193

For determining the bearing ratio of soil

S-361A	Electrical Loading Machine	Electric, 220 V-AC, 1/2 HP, 1 Phase, Spee 0.05/min reversing switch, 10.000 lbs capacity.	1 Set
S-362	CBR Mold	Machined Steel, 6' i.d 7" height, 2" height of collar	3 Pcs
S-363	Spacer Dish	Machined Steel, 5 15/16" dia, 2.416 height	1 Pcs
S-364	Cutting Edge	Machined Steel, sharp edge	1 Pc
S-365	Circular Surcharge Weight	Machined Steel, 5 7/8" o.d 2 1/8" i.d, 5 lbs weight	3 Pc
s-366	Slotted Surcharge Weight	Machine steel, 5 7/8" o.d, 2 1/8" slotted widht, 5 lbs weight	3 Pc
s-354	Modified Proctor Hammer	Machine Steel, galvanized, 2" dia, 18"drop height, 10 lbs weight	1 Pc
s-369	Filter paper	6" dia, 100 sheet box	1 Bo
G-101.6	Proving Ring	6.000 lbs Capacity	1 set
G-131	Dial Indicator	Range 0.01"x 1"	1 pc
G-303	Square Pan	Galvanized steel 65 x 65x 7.5 cm	1 Pc
G-390	Thin Box	Alumunium, 60 gr Capacity	12 Pcs
G-405A	Graduated Cylinder	Plastic, 1000 ml capacity	1 Pc
G-801	Scoop	Cast Alumunium	1 Pc

Also required, but not part of this set :

S-355	Extruder
S-367	Swell Plate
S-368	Swell Tripod
S-450	Moisture Content Test Set
S-218A	Sieve No.4
G-136	Dial Indicator
G-1570	Heavy Duty Solution Balance
G-323	Rectangular Pan

Kembali

LABORATORY CBR TEST SET (S-360B)

S-360B LABORATORY CBR TEST SET
ASTM D-1883 AASHTO T-193

For determining bearing ratio of soil

S-361B	Mechanical Loading Machine	Steel frame, hand operated, two speeds, 10.000 lbs cap, 1.954' piston dia	1 Pc
S-362	CBR Mold	Machined steel, 6" i.d, 7" height 2" height of collar	3 Pcs
SO-363	Spacer Dish	Machined steel, 5 15/16" dia 2.416" height	1 Pc
S-364	Cutting Edge	Machined steel, sharp edge	1 Pc
S-365	Circular Surcharge Weight	Machined Steel, 5 7/8"o.d 2 1/8" slotted widht, 5 lbs weight	3 Pcs
S-366	Slotted Surcharge Weight	Machined Steel, 5 7/8"o.d 2 1/8" slotted widht, 5 lbs weight	3 Pcs
S-354	Modified Proctor Hammer	Machined Steel, Galvanized, 2' dia, 18" drop height, 10 lbs weight	10 Pcs
S-359	Filter Paper	6" dia, 100 sheets/box	1 box
G-101.6	Proving Ring	6.000 lbs capacity	1 set
G-131	dial Indicator	Range 0.001" x 1"	1 Pc
G-303	Square Pan	Galvanized steel 65 x 65 x 7.5 cm	1 Pc
S-359	Thin Box	Alumunium, 60 gr capacity	12 Pcs
G-405A	Graduated Cylinder	Plastic, 1.000 ml capacity	1 Pc
G-801	Scoop	Cast Alumunium	1 Pc
G-871	Trowel	Pointed Type	1 Pc
G-890	Straight Edge	30 cm Lenght	1 Pc

also required, but not part of this set :

S-355	Extruder
S-367	Swell Plate
S-368	Swell Tripod
S-450	Moisture Content Test set
A-218A	Sieve No.4
G-136	Dial Indicator
G-157	Heavy duty Soluution Balance
G-323	Rectangular Pan

Dimension (l x w x h)	: 62 x 62 x 40 cm
Gross Weight	: 120 kg

Kembali

COMPACTION TEST (S-350)

S-350 COMPACTION TEST SET
ASTM D-698/D-1557 AASHTO T-99/T-180

For determining muisture - density relationship

S-351	Standar Proctor Mold	Machined steel, Galavanized, 4" i.d, 4.584" height. 2" height of collar	1 Pc
S-352	Modified Proctor Mold	Machined steel, Galavanized, 6" i.d, 4.584" height. 2" height of collar	1 Pc
S-353	Standar Proctor Mold	Machined steel, Galavanized, 2" dia, 12" drop height, 5.5 lbs weight	1 Pc
S-354	Modified Proctor Hammer	Machined steel, Galavanized, 2" dia, 12" drop height, 10 lbs weight	1 Pc
S-355	Extruder	Steel Frame, hydraulic jack	1 Set
G-303	Square Pan	Galvanized steel, 65 x 65 x 7.5 cm	1 Pc
G-390	Thin Box	Alumunium, 60 gr capacity	12 Pcs
G-405A	Graduated Cylinder	Plastic, 1.000 ml capacity	1 Pc
G-801	Scoop	Cast Alumunium	1 Pc
G-871	Trowel	Pointed Type	1 Pc
G-890	Straight Edge	30 cm Lenght	1 Pc
G-900	Rubber Mallet	Wooden handle	1 Pc
G-920	Steel wire Brush	Wooden handle	1 Pc

also required, but not part of this set :

S-450	Moisture Content Test Set
A-218A	Sieve No. 4
G-157	Heavy Duty Solution Balance
G-760	Filter Paper

Dimension (l x w x h)	: 62 x 62 x 40 cm
Gross Weight	: 120 kg

Kembali

SPECIPIC GRAVITY (VACUM METHOD) (S-340B)

S-340B SPECIFIC GRAVITY (HEATING METHOD)
ASTM D-854 AASHTO T-100

For determining specific gravity of soil/aggregate sample

S-342	Vacuum Hose	Plastic hose with rubber bung, 1 valve	1 Set
G-363	Mixing Bowl	Stainless steel, 250 mm dia	1 Pc
G-404	Graduated Cylinder	500 ml capacity	1 Pc
G-432A	Eflenmeyer Flask	500 ml capacity	1 Pcs
G-473	funnel	Glass, wide mouth	1 Pc
G-521	Wash Bottle	250 ml capacity	1 Pc
G-530	Pipette	Glass, 5 ml capacity	1 Pc
G-600	Thermometer	Range 0 - 50°C	1 Pc
G-679	Vacuum Manometer	4"dia, 0-76 cm HG	1 Pc
G-680	Vacuum Pump	rotary pump	1 Pc

also required, but not part of this set :

A-218A	Sieve No.4
A-250	Pan & Cover
G-150	Cent O-gram balance
G-174	Drying Oven

Dimension (l x w x h)	: 60 x 60 x 60 cm
Gross Weight	: 40 kg

Kembali

SPECIPIC GRAVITY (VACUM METHOD) (S-340A)

S-340A SPECIFIC GRAVITY (VACUUM METHOD)
ASTM D-854 AASHTO T-100

For determining specific gravity of soil sample

S-341	Vacuum stand	wooden base, steel pipecolumn, 2 valves	1 Set
G-363	Mixing Bowl	Stainless steel, 250 mm dia	1 Pc
G-404	Graduated Cylinder	500 ml capacity	1 Pc
G-412A	Vulumetric Flask	500 ml capacity Vacuum	1 Pcs
G-473	funnel	Glass, wide mouth	1 Pc
G-521	Wash Bottle	250 ml capacity	1 Pc
G-530	Pipette	Glass, 5 ml capacity	1 Pc
G-600	Thermometer	Range 0 - 50°C	1 Pc
G-679	Vacuum Manometer	4"dia, 0-76 cm HG	1 Pc
G-680	Vacuum Pump	rotary pump	1 Pc

also required, but not part of this set :

A-218A	Sieve No.4
A-250	Pan & Cover
G-150	Cent O-gram balance
G-174	Drying Oven

Dimension (l x w x h)	: 70 x 70 x 70 cm
Gross Weight	: 45 kg

Kembali

SPECIPIC GRAVITY (HEATING METHOD) (S-340)

S-340 SPECIFIC GRAVITY (HEATING METHOD)
ASTM D-854 AASHTO T-100

For determining specific gravity of soil sample

G-191	Hot Plate(152 H)	Electric, 220 Volt	1 Pc
G-237	Asbestos Wire Gauze(151 H)	15 cm x 15 cm	1 Pc
G-363	Mixing Bowl	stainless steel, 250 mm dia	1 Pc
G-441	Desity Bottle	100 ml capacity	3 Pcs
G-473	funnel	Glass	1 Pc
G-521	Wash Bottle	250 ml capacity	1 Pc

also required, but not part of this set :

A-218A	Sieve No.4
A-250	Pan & Cover
G-150	Cent o-gram balance
G-174	Drying Oven
G-452	Dessicator
G-749	Asbestos Gloves

Dimension (l x w x h)	: 40 x 40 x 40 cm
Gross Weight	: 10 kg

Kembali